1.Use as Circuit Tester
Connect two alligator clips to the ends of the wire to check if resistance exists. If yes, the wire could be a short or open circuit. You can use the Wire Tracer function to locate the problem.
2.Use as a Wire Tracer
By sending a signal down the wire being tested, you can trace the wire with the detector probe. An audible tone will increase in volume as the probe gets closer to the wire. Even when you have a bundle of wires, you can still find the wire you wish to trace with the help of the volume knob.
3.Low Battery Capacity Indication
Move the function selector switch of the emitter to the “SCAN”position,when the cell voltage is below 6.0V，the STATUS indicator and the VERIFY indicator of the emitter can flash at the same time.
1.Power specs:DC,9V laminated battery( included)
2.Max. operating current:Emitter ≤10mA; Receiver≤30mA
3.Signal transmission format: Multi-frequency pulse
4Signal output level:8Vp-p
5.Signal transmission distance:.≥3km
Telecommunication network, line engineering and routine maintenance; Computer network line engineering;Other metal wire wiring works and maintenance work;
Scope of Applications:
Internet Cafe,Hotel network room,Electric power repair,Monitoring installation,Network line engineering
1 * emitter,1 * receiver,1 * earphone,1 * RJ11 adapter,1 * RJ45 adapter,1 * alligator clip adapter,1 * toolkit,1 * user manual,2 * 9V battery
✅VERIFY LAN CABLE CONDITON – Plug one side of the cable into the emitter and the other side into the receiver, it can trace cable assignment and cable state (2-wire), also can be used test physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection. It can take place of cable tester.
✅PROFESSIONAL WIRE TRACKER – The line finder can quickly find the required line pairs among numerous ones. It’s adaptable to RJ45 terminal & RJ11 terminal and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity (max currents:10mA- 30mA, and max voltage is 10V ). Besides, we offer two 9V laminated battery, which are included in the packaging of this item. Low battery indication with bright white LED flash light, included two 9V batteries.
✅TELEPHONE LINE TEST – We only need the emitter to test the status of working of telephone lines, such as judging TIP or PING line and judging whether the telephone line is idle, ringing or off-hook. Rapidly find the target wire from among plenty of telephone wires, network wires, and all types of connected operating Ethernet switch /Router/PC.
✅ADDIDITIONAL EARPHONE – In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of “beep beep” sound. Adjust the volume knob to make the volume proper and avoid being interfered.
✅PACKAGE CONTENT – 1 x Wire Tracker Emitter, 1 x Wire Tracker Receiver, 1x RJ45 Adapter , 1 x RJ11 Adapter，1x Earphone，1 x Alligator Clip Adapter，1 x Toolkit，1 x User Manual，2 x 9V Battery.