Model: 10m/roll 5050 White LED strip
Light source: SMD 5050
Emitting Color: White
Color temperature: 7000-8000K
FPCB color: White
LED quantity: 60 LEDs/m, 10m 600 LEDs in total
Protection Rate: IP65 Waterproof (Can’t be used underwater)
Working Voltage: 24V DC
Max Working Current: 5A
Max Output power: 120W
Beam angle: 120 °
Working temperature: -20℃ to 60℃
Size: L1000cm (10M) x W1.0cm x T0.25cm
Net weight: 410g
Life span: >50000 hours
1) The wattage of 10m LED strip is about 120W. If the strip blinks or flashes, maybe the power is not enough for the strip. So the power supply for 10m led strip must be 24V 5A 120W at least. Please don’t use 12V power supply for this 24V LED strip.
2) The LED strip comes without power supply and controller.
3) Please spread all the strip from the tape before use. In a different way, the strip will overheat in several minutes.
Used for home, garden, hotels, clubs, shopping malls decoration
Architectural decorative lighting, boutique atmosphere lighting
Applied in back-lighting, concealed lighting, channel lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Automobile and bicycle decoration, border or contour lighting
1 x 10 meters LED strip light
You may like these
25m 1500 LEDs 2835 White / Warm White LED Strip not waterproof:
20m 1200 LEDs 5050 Warm White/White/RGB LED Strip waterproof IP67:
Protected to use: This is a new generation 24V LED strip, which is much brighter than old 12V LED strip. But it is still touchable and Protected to children.
Double fixation: It comes with self-adhesive 3M tape on its back, so You’ll be able to fix it on most of the dry and flat surfaces. On the other hand, in case you are mounting it against gravity or on irregular surface, the tape alone will not hold it. You’ll be able to toughen it with the clips and screws in the bag.
Well safe: The LED strip is covered with clear silicone coating, which protects it very well from water and makes it easy to clean.
Shorten, lengthen and bend freely: The LED strip can be bring to an end between every 6LEDs without damaging the rest strip. It comes with two wires on both ends. You’ll be able to connect two strips without soldering. It is also soft and flexible. You’ll be able to bend it to the shape you wish to have.
More convenient but less cost: 10m continuous length LED strip is equivalent to 2pcs 5m led strip and 1pc amplifier. But if choose 10m LED strip, you’ll save much money, labor and time.